| Model | PT-1100-100HXX |
| Capacity | 100kN |
| Temperature Range | Room temperature ~ 200℃ (with visual window, lighting). |
| Control Method | P.I.D. automatic temperature calculation. |
| Distribution Accuracy | ±1%(1℃) at- room100℃ |
| Measurement and Control Software | The full open test software of Windows |
| Force Measurement Accuracy | Better than ±1% |
| Force Measurement Resolution | 1/300000 (The whole process is not divided level or equivalent 6 level |
| Accuracy of beam displacement measurement. | Resolution higher than 0.0025mm |
| Effective Force Measurement Range | 0.4%--100% |
| Deformation displayed value Accuracy | Better than ±0.5%(0.2—10mm) |
| Test speed | 0.01—500mm/minDeformation displayed value Accuracy |
| Speed control accuracy | ±1%(0.01~10mm/min); ±0.5%(10~500mm/min) |
| Constant force, constant deformation and constant displacement control precision | Set value <10%FS, wihin ±1.0% Set value≥10%FS, within ±0.1% |
| Deformation rate control precision. | <0.05%FS, within ±2.0% set value ≥0.05%FS, withib ±0.5% set value |
| Tests stroke | Max 450mm,not including the fixture length |
| Effective test space | Left Right220mm,Back Inreont 350mm |
| Unit switch | Contains a variety of internationally accepted unit of measurement, users can define their own desired unit. |
| Stop mode | Upper and lower security settings, emergency stop button, the program setting of strength and elongation, specimen damage sensing. |
| Special Features | tension, sustained pressure, fatigue, bending, flexural and shear tests; users can also according to their actual test needs to define its own test methods. |
| Standard accessories | Standard gripper X 1, tensile machine seat X1, RS-232 data lines X1, power cord X1. |
| Side(W×D×H)cm | Tensile Machine 113×65×265cm,Oven 105×45×60mm,size after install 113×105×265mm |
| Machine Weight | About 1800kg |
| Motor | AC servo motor. |
| Power | 1PH,380V±10%,50Hz,3kW |
